The CDV-700RP is a
Pancake probe
especially designed as a replacement for the standard beta/gamma probe
from
your Victoreen, Lionel, or Electro Neutronics, Model
CDV-700 survey meter. As a Pancake style probe, its broad
Geiger-Mueller detector surface
will substantially increase the sensitivity of your CDV-700 and enable detection
of Alpha, as well as low energy Beta, Gamma, and X-radiation.
The Replacement Probe is configured with a 3 prong plug and lock-screw type connection.
To swap out your standard probe, simply
unscrew it from its base
and pull out the old Geiger-Mueller tube. Then plug the 3 pronged
Replacement Probe in its place, and hand tighten the built-in knurled lock
screw. See the close-up photo at right of the matching connectors.
The Replacement Probe handle incorporates a black vinyl grip that is adjustable for the perfect fit on
your CDV-700 meter. Complete specifications on the CDV-700RP Replacement
Probe are listed in the table below.
This item has a 2 week lead time.
Specifications:
| Detector |
Geiger-Mueller tube with thin mica
window |
| Window Thickness |
1.4 to 2.0 mg/cm² |
|
Window Diameter |
1.75" (45 mm) |
| Radiation Detected |
Alpha, Beta, low-energy Gamma and X-ray |
| Efficiences |
Gamma at 3,600 CPM/mR/hr;
Beta - C-14 at 10%, Sr(Y)-90 at 35% |
| Operating Voltage |
850 - 1000 volts; 900 optimum |
Temperature Range |
-25 to +50 degrees C. (-13 to 122 degrees F.) |
| Humidity Range |
0 - 90% Relative Humidity |
| Probe Construction |
Anodized aluminum housing |
| Probe Diameter |
2.75" |
| Probe Handle Length |
10", including detector end |
| Probe Handle Grip |
Black vinyl, and adjustable along
handle length |
| Connector |
To match Victoreen or Lionel
CDV-700 meters |
|
Weight |
11.5 oz. |
| Warranty |
1 year on probe, 90 days on GM
detector; includes protective red cap over detector (in top photo) |
Country of Make |
USA |
